Topic: FIS Control not working

HI,

I have a MK5 R32 and i'm a new user of FIS Control.

My FIS was working only for 1 day and after sending a new setting made with the configurator it stop to work.

I already try to send the last firmware and clear the settings with teraterm but still nothing on the cluster.

Need help please

Thanks

2 (edited by AudiUnlimited 2017-11-21 14:16:06)

Re: FIS Control not working

Hi,
had the same problem some time ago.
What i did was using the Android app to clear the settings then flashed the latest firmware with the same app.
After that it came back to life and its still working since.
Hope this helps..

Re: FIS Control not working

Hi,

I have an iPhone so can't use the Android app.

I have done the same as you but with teraterm, clearing settings was successful and firmware update to but still nothing on the cluster

Post's attachments

IMG-1507.JPG 1.67 mb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

Re: FIS Control not working

You have to set the correct coding to use the FIS-Control in the Mk5.
Open TeraTerm and enter "SET DDP". You should see the confirmation "DONE".
Next time you start the ignition, the FIS-Control should show up again in your cluster.

Re: FIS Control not working

Thanks Stefan it's working again.

But i most do Something wrong because everytime i try do send a preset with TeraTerm FIS stop working

Re: FIS Control not working

Have you set "CAN bus channel" to "Golf 5" in the configurator?

Re: FIS Control not working

stefan@fis-control wrote:

Have you set "CAN bus channel" to "Golf 5" in the configurator?

Thanks it's working.

I have set some collection and work great.

My R32 is supercharged so i buy a zadatec boost sensor, and it's connected on FIS on sensor5.
When i make my preset only for Boost this is one not working.


Preset 2

Label - Boost
Control unit -  Ext. Sensor
CAN
Group  - 0
Value - 5
View -  Boost

Re: FIS Control not working

Hi,

you have selected the wrong group and value.
Group 0 is not used at all.
The sensor inputs 1 to 4 are in the first group,
sensor 5 to 8 in the second group.

So your boost sensor will show up as the first value in the second group of the external Sensors.

Re: FIS Control not working

stefan@fis-control wrote:

Hi,

you have selected the wrong group and value.
Group 0 is not used at all.
The sensor inputs 1 to 4 are in the first group,
sensor 5 to 8 in the second group.

So your boost sensor will show up as the first value in the second group of the external Sensors.

Ok now i understand.

Thanks a lot for your help

Re: FIS Control not working

Hi,

External sensor is working good.

on my preset i have set 6 values but on the cluster there are only 5 is it normal?

See attached the picture

Post's attachments

unnamed.jpg 1.36 mb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

Re: FIS Control not working

Yes, this is normal for the Mk5. Although it looks like there is enough space for another row, there isn't.
The Mk4 had a smaller font, that allowed 6 rows.